Carmeuse Deploys Autonomous Haulage at Drummond Island
Carmeuse has partnered with Caterpillar to deploy autonomous haulage trucks at its Drummond Island quarry in northern Michigan, one of the first autonomous Cat 777 fleets in a quarry environment, and the first deployment of its kind on a continuous operation with a long-haul route.
Why Drummond Island, why now
The remote quarry has struggled to staff a 24/7 haul truck operation. Autonomy addresses that labor gap directly while improving safety and efficiency. The project converts five Caterpillar 777 haul trucks to autonomous operation, equips loading units with precision guidance technology, and adds site-awareness systems to supporting equipment so the whole fleet can communicate and operate safely together. Trucks run several miles between the quarry and the plant, making this a strong proving ground for autonomous haulage at scale.
A learning platform, not a one-off
Drummond Island is designed as a strategic pilot. It will validate the operational, safety, workforce, and economic case for autonomous haulage in a quarry setting, results Carmeuse will use to assess where else the technology fits, with the long-term goal of a scalable roadmap across operations.
Connected to the broader digitalization strategy
The project feeds a larger data set linking quarry and plant operations, supporting initiatives like Ops Hub and Quarry to Kiln*. Truck condition data now flows directly to the maintenance team, aiding scheduling and parts ordering.
Safety and ESG relevance
Success is being tracked through several KPIs, not just injury counts, but reduced human exposure to large mobile equipment: less fatigued or distracted driving, fewer strains from mounting/dismounting, and fewer property-damage errors. This ties directly to the "Social" pillar of Carmeuse's ESG narrative, converting a monotonous, fatigue-inducing role into more engaging, technology-driven work within a controlled Autonomous Operating Zone. Viewing the haul fleet holistically, rather than truck by truck, also opens the door to efficiency gains that could lower the operation's environmental footprint.
Where Carmeuse stands versus the industry
Autonomous mobile equipment has operated in large-scale mining for over 20 years, but typically at sites with 70+ trucks in the 240–400 ton range. Quarries like ours, 15 trucks or fewer, under 100 tons, are only now entering this market, working from two different directions: equipment makers like Caterpillar, but also companies that are newer to this and provide autonomous haulage solutions independent of the truck manufacture. This makes Carmeuse an early mover in its segment.
Workforce edge
In a tight labor market, autonomous trucks reduce dependence on hard-to-fill operator roles while creating technology-focused positions that appeal to a newer workforce, enabling a smaller team to operate more safely and productively.
Timeline
Planning, engineering, and site readiness began in 2025, including network infrastructure, procedures, site controls, and training. During the winter shutdown, the haul trucks were converted for autonomous operation, and the system was commissioned and tested. Carmeuse achieved its first autonomous load and haul cycle in April 2026, going live.
Now, our focus has been on monitoring performance, optimizing the system, and capturing lessons learned throughout the production season.
* "Ops hub" is Carmeuse's centralized operational monitoring platform, which aggregates real-time data from across our sites to support faster, better-informed decisions.
“Quarry-to-Kiln” refers to analyzing the journey of lime from the place it is extracted out of the earth (the quarry) to the high-temperature oven where it is processed (the kiln) to look for opportunities to optimize across the entire value chain. As opposed to managing the quarry and the kiln in isolation.